Features

• Integral connector latch

• Rugged thermoplastic housing

• -55°C to +125°C operating temperature

• Available in 2, 3, 4, 6, 8 & 12 sizes

• Silicone seals

• Accepts AWG 18 through 14 wire

• Crimp contacts with option of gold or nickel, solid or stamped

• Current rating: 13 amps all contacts

• Fail safe secondary locks

• Hand insertable/removable terminals

• Budget minded

Benefits

• Tactile and audible coupling feedback

• Long service life

• Engine compartment rated

• Meets most harness design requirements

• Superior environmental seal

• Seals .088 to .145 dia. insulation

• Data transmission or power distribution terminals

• Meets most power requirements

• Reliable contact retention system

• No special tools required

• Low installation costs

Material Specifications

General Specifications

• Current Rating (Maximum): No. 16 13 amps

• Silicone Insert: Front and rear silicone inserts are devoid of all organic matter.

• ARC Resistance: All dielectric materials withstand a minimum of 130 seconds per ASTM D-495.

• Physical Shock: No locking, unmating or other unsatisfactory result after 50g’s in each of three mutually perpendicular planes.

• Dielectric Strength: 1500 volts minimum

• Submersion: Properly wired and mated connection will withstand immersion under three feet of water without loss of electronic qualities or leakage.

• Vibration: Maintains continuity and exhibits no mechanical or physical damage after vibration. 20 g’s at 10-2000 Hz.

• Temperature: Operative at temperatures from -55°C to + 125°C at rated current.

• Dielectric Withstanding Voltage (Test Voltage): Sea Level - 1500 VAC (rms)

• Contact Retention: Contacts withstand a minimum load of 25 lbs. for size 16.

• Thermal Shock: No cracking, chipping or leaking after 5 test cycles from -55°C to +125°C.

• Insulation Resistance: 1000 megohms minimum at 25°C.

• Usable Wire Size: No. 16 contacts - receive conductor AWG 14 thru 18. Rear insert will seal on smooth insulation from .088” to .145” 0.0.

• Durability: No electrical or mechanical defects after 100 cycles of engagement and disengagement.

• Contact Millivolt Drop: No. 16 contacts -100 millivolt drop* using 16 AWG wire. Test current 13 amps. *Less drop through wire.

Insert Arrangements

Number of Terminals

                 Terminal Size                        

2

16

3

16

4

16

6

16

8

16

12

16

Terminals

Solid - Crimp Type - Nickel Plated

0460-202-16141

PIN

16-18 AWG

0462-201-16141

SOCKET

16-18 AWG

0460-215-16141

PIN

14-16 AWG

0162-209-16141

SOCKET

14-16 AWG

Stamped & Formed Crimp Type - Nickel Plated
Strip Form (4000 Per Reel)

1060-16-0122

PIN

16-18 AWG

1060-16-0122

SOCKET

16-18 AWG

1060-14-0122

PIN

14-16 AWG

1062-14-0122

SOCKET

14-16 AWG