Deutsch IPD offers a full line of accessories to assist in integrating the termination system into each equipment system.

Mounting Configurations help meet the needs of today’s wire circuit designers with mounting configurations for every need.

Thermoplastic Connector End-Caps prevent removal of the silicone wire seal grommets. Designed for applications that involve fuel and oil exposure. 
(Specify Mod. “EOO3” to the standard DT-Series part number.)

Indexing and color coding prevent mismating in side-by-side or modular assemblies. Four indexing (clocking) positions are available in the size 8 and 12-pin DT connectors. 

Receptacle Mounting Brackets with V-grooves aid in wire routing and are available in two size ranges:  1011-026-0205 for DT-Receptacle sizes 2, 3, 4, 6 and 12 and 1011-027-0805 for size 8.

Power Plugs with rugged thermoplastic receptacles offer complete, environmentally sealed single-power circuit termination and have integral coupling latches for tactile and audible feedback during coupling. Designed for inline, cable-to-cable applications; integral V-Groove accepts mounting clips, brackets or flanges. 

I/O Receptacles provide wire circuit penetration into and out of engines, transmissions, gear boxes and other areas where circuitry must be reliably sealed against oil and fluid leakage. 

Reduced Diameter Wire Seals are available for special applications such as ABS brakes and electronic fuel injectors. Standard DT connectors accept AWG 18 through 14 wire; reduced diameter wire seals are available as the CO15 modification.

Or: for a combination of end-caps and reduced wire seals, specify the CE01 modification with the standard DT-Series part number.